Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Tail light bulb

Fiat Bravo - Tail light bulb

Tail Light Bulb Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Rear Light Bulb on a Fiat Bravo
To replace the rear light bulb on a Fiat Bravo, lift the boot lid to access the screws located next to the light. By unscrewing these screws, you can remove …Read all…
Posted on 25 August 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacing Reverse Light on Fiat Bravo
Lift the car with a jack, as you will need to get underneath it. As shown in the video, locate the connector for the reverse light bulb. Reach in and, somewhat …Read all…
Posted on 24 May 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacing the "Stop" Bulb on Fiat Bravo
Open the rear hatch of the boot and unscrew the two bolts securing the rear light, then detach it from its housing. Disconnect the connector and completely …Read all…
Posted on 2 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos