Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the "Stop" Bulb on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

Open the rear hatch of the boot and unscrew the two bolts securing the rear light, then detach it from its housing. Disconnect the connector and completely remove the light, placing it on a workbench.

At this point, the operation is very simple: just remove the lower cover where the various bulbs are mounted. Unscrew the affected bulb (in our case, the "stop" bulb is the right one when looking at the light from behind), insert and screw in the new one you purchased.

Reinsert the cover with the bulbs into the light and remount the light onto the car.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Side Indicator on a Fiat Bravo
How to Replace the Side Indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but sturdy plastic tool, lever the side indicator out of your Fiat Bravo. Once done, disconnect the outer cover of the indicator from th…
Replacing Side Indicator Bulbs on a Fiat Bravo
Replacing Side Indicator Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will see instructions on how to remove and replace the bulbs of the side indicators on a second series Fiat Bravo. First,…
Replacing the Number Plate Light on a Fiat Bravo
Replacing the Number Plate Light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will see how to disassemble and replace the number plate bulbs on a Fiat Bravo, as well as on other models from the manuf…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos