Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Light on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: License plate light

See other generations:
Video tutorial

In this video tutorial, you will see how to disassemble and replace the number plate bulbs on a Fiat Bravo, as well as on other models from the manufacturer. First, open the boot lid to a comfortable height so you can work more easily; then remove the light unit along with the bulb by prying on the sides with something thin.

At this point, remove the bulb holder and pull out the old bulb, as shown in the video; all that remains is to replace it with the new one of the correct type (in this case, a LED bulb), and reassemble everything!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Fiat Bravo
How to Replace the Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the headlight bulb on the Fiat Bravo, open the bonnet to access the rear of the headlight corresponding to the bulb to be removed. Once th…
How to Install a Reversing Camera on a Fiat Bravo?
How to Install a Reversing Camera on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To install a reversing camera on a Fiat Bravo, remove the radio by unscrewing the fixing screws. Once removed, connect the reversing camera cable ins…
Replacing the Front Headlamp Bulb on the Fiat Bravo
Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide outlines the main steps to remove the front headlamp bulb on the Fiat Bravo and replace it with an LED type. First, remove the headlamp fr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos