Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Reversing Camera on a Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

To install a reversing camera on a Fiat Bravo, remove the radio by unscrewing the fixing screws. Once removed, connect the reversing camera cable inside and also remove the glove compartment to allow the cable to pass through.

Next, route the cable to the rear of the vehicle, hiding it behind the door pillars. Finally, insert the reversing camera into its housing above the number plate and connect it to the appropriate cable.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Install or Replace Parking Sensors on the Fiat Bravo 2
How to Install or Replace Parking Sensors on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will learn how to install or replace the parking sensors on the second series Fiat Bravo. First, open the boot lid and start…
How to Reset the "Service" Light on a Fiat Bravo
How to Reset the "Service" Light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you begin, sit in the driver's seat of your Fiat Bravo. Start by activating the instrument cluster by turning the key in the ignition switch. …
How to reset the "Service" light on a Fiat Bravo
How to reset the "Service" light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you begin, sit in the driver's seat of your Fiat Bravo. Start by activating the instrument panel by turning the ignition key to position one. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos