Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Fiat Bravo, lift the boot lid to access the screws located next to the light. By unscrewing these screws, you can remove the light from its housing to replace it with a new spare part.

After removing the light, unscrew the bulbs inside to open it and pull out the bulb that needs replacing. This can now be replaced with a new spare part, reassembling all previously removed components.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Fiat Bravo
How to Replace the Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the headlight bulb on the Fiat Bravo, open the bonnet to access the rear of the headlight corresponding to the bulb to be removed. Once th…
Replacing the "Stop" Bulb on Fiat Bravo
Replacing the "Stop" Bulb on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Open the rear hatch of the boot and unscrew the two bolts securing the rear light, then detach it from its housing. Disconnect the connector and comp…
How to Replace the Front Headlight Bulb on a Fiat Bravo
How to Replace the Front Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Here are the instructions on how to remove and replace the dipped beam bulb of the front headlight on a Fiat Bravo. First, open the vehicle's bonnet …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos