Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Bulbs on a Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Light bulb

To replace the climate control bulbs on a Fiat Bravo, you need to detach the plastic cover located above the control panel. Next, you will need to remove the cover around the gear lever so that the screws securing the climate control panel are accessible from both the lower and upper parts. This way, the panel with the controls can be extracted from its housing, and the bulbs at the back can be removed and replaced. After replacement, you can reassemble all the removed parts.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Rear Light of the Fiat Bravo 2
How to Dismantle the Rear Light of the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing th…
Guide to Replacing the Climate Control Bulbs on a Fiat Bravo
Guide to Replacing the Climate Control Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This brief and simple guide will show you how to remove and replace the bulbs for the climate control on a Fiat Bravo. First, get inside the vehicle …
How to Fix the Dual Zone Air Conditioning on Fiat Bravo
How to Fix the Dual Zone Air Conditioning on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To access the broken actuators (there are five in total) on the Fiat Bravo 2nd series, you first need to remove the entire centre dashboard, which ob…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos