Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Climate Control Switches on a Fiat Bravo 2

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: A/C controls

See other generations:
Video tutorial

In today’s tutorial, we will see the main steps to remove the climate control switches on a Fiat Bravo second series. First, get inside the vehicle and remove the gear knob by pulling it upwards; then take off the plastic cover of the climate controls and unscrew the screws underneath, as shown in the video.

At this point, unscrew the screws found under the gear knob and those of the climate control switches; now pull out the entire panel, disconnecting the electrical connectors located at the back of the switches!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Removing the Air Conditioning Controls from a Fiat Bravo
Removing the Air Conditioning Controls from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will learn how to remove the air conditioning controls from a Fiat Bravo by following these easy instructions. First, get in…
How to dismantle the climate control switches of the Fiat Bravo
How to dismantle the climate control switches of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) The following steps will show you the procedure for dismantling and replacing the climate control switches of the Fiat Bravo. First, get inside the c…
Guide to Replacing the Climate Control Bulbs on a Fiat Bravo
Guide to Replacing the Climate Control Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This brief and simple guide will show you how to remove and replace the bulbs for the climate control on a Fiat Bravo. First, get inside the vehicle …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos