Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Climate Control Bulbs on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Instrument panel light

This brief and simple guide will show you how to remove and replace the bulbs for the climate control on a Fiat Bravo. First, get inside the vehicle and start by removing the radio to access the screws securing the climate control. Then, disconnect the electrical connector for the bulbs found at the back, allowing you to remove and replace them with new ones (bulb type). Now, reassemble the climate control and the radio, ensuring all wiring is correctly connected!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Climate Control Bulbs on a Fiat Bravo?
How to Replace the Climate Control Bulbs on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the climate control bulbs on a Fiat Bravo, you need to detach the plastic cover located above the control panel. Next, you will need to re…
Removing the Air Conditioning Controls from a Fiat Bravo
Removing the Air Conditioning Controls from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will learn how to remove the air conditioning controls from a Fiat Bravo by following these easy instructions. First, get in…
How to Remove the Climate Control Switches on a Fiat Bravo 2
How to Remove the Climate Control Switches on a Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In today’s tutorial, we will see the main steps to remove the climate control switches on a Fiat Bravo second series. First, get inside the vehicle a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos