Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the climate control switches of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: A/C controls

See other generations:
Video tutorial

The following steps will show you the procedure for dismantling and replacing the climate control switches of the Fiat Bravo. First, get inside the cabin and start by removing the gear lever gaiter; take off the plastic cover at the base, as shown in the video.

At this point, unscrew the screws of the climate control switches to remove them, disconnecting the wiring found at the back; replace the bulbs of the switches if necessary or the entire panel, reconnecting the electrical connections and reassembling all components!


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Climate Control Bulbs on a Fiat Bravo
Guide to Replacing the Climate Control Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This brief and simple guide will show you how to remove and replace the bulbs for the climate control on a Fiat Bravo. First, get inside the vehicle …
How to Remove the Climate Control Switches on a Fiat Bravo 2
How to Remove the Climate Control Switches on a Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In today’s tutorial, we will see the main steps to remove the climate control switches on a Fiat Bravo second series. First, get inside the vehicle a…
Removing the Air Conditioning Controls from a Fiat Bravo
Removing the Air Conditioning Controls from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In today's tutorial, you will learn how to remove the air conditioning controls from a Fiat Bravo by following these easy instructions. First, get in…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos