Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Headlight bulb

Here are the instructions on how to remove and replace the dipped beam bulb of the front headlight on a Fiat Bravo. First, open the vehicle's bonnet and start by removing the plastic protective cover for the bulbs located behind the headlight assembly; then disconnect the electrical connector to remove the bulb, as shown in the video. If necessary, also replace the position bulb by removing the connector and then the small bulb; install the new bulbs of the correct type and with the same fitting, testing their operation at the end!

Posted on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Fiat Bravo
How to Replace the Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the headlight bulb on the Fiat Bravo, open the bonnet to access the rear of the headlight corresponding to the bulb to be removed. Once th…
Replacing the Front Headlamp Bulb on the Fiat Bravo
Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide outlines the main steps to remove the front headlamp bulb on the Fiat Bravo and replace it with an LED type. First, remove the headlamp fr…
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide will show you how to remove and replace the front headlamp bulb on the Fiat Bravo; this operation is done with the headlamp removed. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos