Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight of a Fiat Bravo

Model: Fiat Bravo - Years 2007-2014
Part: Headlight

Video tutorial
Detailed instructions - To remove the front headlight of a Fiat Bravo, turn off the engine and open the bonnet. Remove the upper screws that secure the headlight assembly to the frame. To access the lower and side fixings, it is necessary to loosen or partially remove the front bumper by unscrewing the screws in the wheel arch and at the bottom. Once access is clear, unscrew all the headlight fastening screws. Disconnect the main electrical connector by pressing the locking tab. Carefully pull the headlight from its housing. The headlight assembly is now ready to be replaced or reinstalled by following the reverse procedure.

Posted on 30 September 2026 by ScegliAuto


Related tutorials

How to remove the front light of a Fiat Bravo
How to remove the front light of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) As shown in this video tutorial, to remove the front light of a second-generation Fiat Bravo, produced from 2007 to 2014, you first need to remove pa…
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide will show you how to remove and replace the front headlamp bulb on the Fiat Bravo; this operation is done with the headlamp removed. First…
How to Replace the Front Headlight Bulbs on Fiat Bravo
How to Replace the Front Headlight Bulbs on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlight bulbs on Fiat Bravo: open the front bonnet by pulling the lever located at the bottom right of the dashb…

Other guides you may be interested in

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos