Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How to remove the bumper of a Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Front bumper
Operation: How to remove the bumper of a Fiat Bravo

Before starting, we will have to open the front hood of our Fiat Bravo. So let's start by unscrewing and removing the screws on the upper side of the bumper. After that, we will have to unscrew and remove the screws in the front wheel arches. Once this is done, we will have to unscrew and remove the bolts on the lower side of the bumper, which secure the engine guard plate to the front bumper. By doing so, we will have freed the bumper itself. We then proceed by disengaging and extracting the bumper from the front of the car, and the disassembly will be correctly completed.


Posted on 20 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos