Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the rear bumper of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Rear bumper

Let's discover the steps for disassembling and replacing the rear bumper of the Fiat Bravo. First of all, let's move to the rear of the vehicle and start unscrewing and removing all the fixing screws we find on both sides of the rear wheel arches; in the same way, unscrew the screws of the rear lights, disconnecting the electrical connectors to remove them, as shown in the video. At this point, gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; reassemble the rear bumper and finally the lights!

Posted on 13 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat Bravo (2007-2014 / Bravo 2) Before starting, open the front bonnet of your Fiat Bravo. Begin by unscrewing and removing the screws located on the upper side of the bumper. Next,…
Fiat Bravo (2007-2014 / Bravo 2) With the help of the following tutorial, we will show you the steps dedicated to removing the rear bumper of the Fiat Bravo. The first step to be car…
Fiat Bravo (2007-2014 / Bravo 2) These short and simple instructions will show us how to disassemble and replace the steering wheel of the Fiat Bravo, along with its airbag. First, w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos