Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

This tutorial will guide you through the steps to remove the rear bumper of the Fiat Bravo. The first step is to open the boot and remove the rear lights.

Once the lights are removed, proceed to detach the bumper. The second step is to remove the side screws of the wheel arch using a cross-head screwdriver.

Also, remove the screw located inside, and with an 8mm spanner, unscrew the four bolts at the bottom of the bumper. The third step involves completely removing the bumper by simply pulling it outwards.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to disassemble the rear bumper of the Fiat Bravo
How to disassemble the rear bumper of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let's discover the steps for disassembling and replacing the rear bumper of the Fiat Bravo. First of all, let's move to the rear of the vehicle and s…
How to Remove the Bumper from a Fiat Bravo
How to Remove the Bumper from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before starting, open the front bonnet of your Fiat Bravo. Begin by unscrewing and removing the screws located on the upper side of the bumper. Next,…
How to Remove the Rear Door Panel of the Fiat Bravo
How to Remove the Rear Door Panel of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Removing the rear door panel of the Fiat Bravo is straightforward. Start by removing the cover cap inside the handle grip of the central panel and in…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos