Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Removing the rear door panel of the Fiat Bravo is straightforward. Start by removing the cover cap inside the handle grip of the central panel and inside the opening lever housing to access the screws securing the panel.

Once the caps are removed, disconnect the window winder by pressing it backwards to loosen the grip of the retaining clip. At this point, unscrew all the securing screws, including those under the lower edge, then pry along the perimeter to release the pressure clips.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Door Panel on the Fiat Bravo?
How to Replace the Rear Door Panel on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the rear door panel on the Fiat Bravo, loosen all the screws that secure it to its housing. These are located at the bottom of the door, n…
How to Remove the Door Panel (Driver's Side) on Fiat Bravo
How to Remove the Door Panel (Driver's Side) on Fiat Bravo
Fiat Bravo (1995-2001 / ) Let's see how to remove the door panel (driver's side) on a Fiat Bravo. Disconnect the battery terminals located in the engine bay. Use a screwdriver…
How to Remove the Door Panel of a Fiat Bravo
How to Remove the Door Panel of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you can start, open the door of your Fiat Bravo. Begin by removing the screw covers that conceal the screws securing the door panel, thus acce…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos