Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Panel on the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Door trim panel

To replace the rear door panel on the Fiat Bravo, loosen all the screws that secure it to its housing. These are located at the bottom of the door, next to the window switch housing and beneath the speaker protection panel. Once all these screws are loosened, you can completely detach the panel by disconnecting the appropriate connectors. After the old panel is removed, insert the new one, securing it and connecting it properly to its housing.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of the Fiat Bravo
How to Remove the Rear Door Panel of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Removing the rear door panel of the Fiat Bravo is straightforward. Start by removing the cover cap inside the handle grip of the central panel and in…
How to Remove the Door Panel on a Fiat Bravo
How to Remove the Door Panel on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you remove the door panel on a Fiat Bravo? Don’t worry, you will see how to proceed. Before starting the disassembly work, disconnect the batt…
Removing the Door Panel on a Fiat Bravo
Removing the Door Panel on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, learn how to remove the door panel of a second series Fiat Bravo. First, open the door and remove the plastic covers: start w…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos