Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Speaker on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Speaker

Below are the instructions that will allow you to remove and replace the front speakers on a Fiat Bravo, following these simple steps. First, open the front door and start removing the door panel by unscrewing the fixing screws and prying off the sides; then, remove the speaker by taking off the covers using a drill bit to unscrew them, as shown in the video. At this point, disconnect the electrical connector and install the new speaker, applying the reverse procedure of removal!

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speakers in a Fiat Bravo?
How to Replace the Speakers in a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the speakers in a Fiat Bravo, first remove the door panel to access the speaker. Loosen the fixing screws located near the window switch a…
How to replace the speakers of the Fiat Bravo
How to replace the speakers of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Today we will explain how to replace the speakers of a Fiat Bravo vehicle. Before replacing the speakers, it is necessary to remove the door panel. I…
How to Replace the Speakers in the Fiat Bravo
How to Replace the Speakers in the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, we will go through the steps to remove and replace the front and rear speakers in the Fiat Bravo. To remove the speakers, you…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos