Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Speaker

In this video tutorial, we will go through the steps to remove and replace the front and rear speakers in the Fiat Bravo. To remove the speakers, you first need to take off the door panel by unscrewing the fixing screws on the sides and disconnecting the window switch connector; once removed, unscrew the screws on the side of the speaker and disconnect its electrical connector to remove it, as illustrated in the video. Now install the new speaker and reassemble everything!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the speakers of the Fiat Bravo
How to replace the speakers of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Today we will explain how to replace the speakers of a Fiat Bravo vehicle. Before replacing the speakers, it is necessary to remove the door panel. I…
Replacing the Front Speaker on a Fiat Bravo
Replacing the Front Speaker on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Below are the instructions that will allow you to remove and replace the front speakers on a Fiat Bravo, following these simple steps. First, open th…
How to Replace the Rear Door Panel on the Fiat Bravo?
How to Replace the Rear Door Panel on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the rear door panel on the Fiat Bravo, loosen all the screws that secure it to its housing. These are located at the bottom of the door, n…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos