Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Speaker

Fiat Bravo - Speaker

Speaker Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Speakers on a Fiat Bravo
Today, you will learn how to replace the speakers in a Fiat Bravo. Before replacing the speakers, you need to remove the door panel. In our case, the large …Read all…
Posted on 25 October 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacing the Front Speaker on a Fiat Bravo
Below are the instructions that will allow you to remove and replace the front speakers on a Fiat Bravo, following these simple steps. First, open the front …Read all…
Posted on 3 September 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Speakers in the Fiat Bravo
In this video tutorial, we will go through the steps to remove and replace the front and rear speakers in the Fiat Bravo. To remove the speakers, you first …Read all…
Posted on 23 August 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Speakers in a Fiat Bravo?
To replace the speakers in a Fiat Bravo, first remove the door panel to access the speaker. Loosen the fixing screws located near the window switch and in the …Read all…
Posted on 13 June 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos