Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Speaker

Today we will explain how to replace the speakers of a Fiat Bravo vehicle. Before replacing the speakers, it is necessary to remove the door panel. In the case of our car, the large panel to be removed is the front right door panel, so we will replace the speaker on the right side of the vehicle. To remove the panel, we need to unscrew the side, bottom, and top screws, remove the switch panel and disconnect its connector, remove the handle cover and unscrew the central screw. Once the panel is removed, we can unscrew the screws surrounding the speaker and disconnect its connector to remove it from its seat. Insert the new speaker and reassemble the vehicle panel.

Posted on 19 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speakers in the Fiat Bravo
How to Replace the Speakers in the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, we will go through the steps to remove and replace the front and rear speakers in the Fiat Bravo. To remove the speakers, you…
Replacing the Front Speaker on a Fiat Bravo
Replacing the Front Speaker on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Below are the instructions that will allow you to remove and replace the front speakers on a Fiat Bravo, following these simple steps. First, open th…
How to Replace the Speakers in a Fiat Bravo?
How to Replace the Speakers in a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the speakers in a Fiat Bravo, first remove the door panel to access the speaker. Loosen the fixing screws located near the window switch a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos