Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Brake pads

Fiat Bravo - Brake pads

Brake Pads Fiat Bravo (2007-2014 / bravo 2)

Fiat Bravo (2007-2014 / Bravo2)
How to replace the rear brake pads on the Fiat Bravo?
In this tutorial, you will see how to replace the rear brake pads on the Fiat Bravo. First, open the bonnet and unscrew the cap of the brake fluid reservoir, …Read all…
Posted on 28 August 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Front Brake Pads on a FIAT BRAVO 2
In this video tutorial, you will see how to replace the front brake pads on a FIAT BRAVO 2. The first step is to purchase new brake pads from an authorised …Read all…
Posted on 24 August 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Change the Brake Pads on a Fiat Bravo 2 (198)?
In this video tutorial, see how to change the rear brake pads on a Fiat Bravo 2. First, lift the car and remove the wheel. Once done, unscrew the two bolts …Read all…
Posted on 31 July 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
How to Replace the Front Brake Pads of the Fiat Bravo
In this tutorial, learn how to remove and replace the front brake pads of the Fiat Bravo in simple and quick steps. First, lift the vehicle and remove the …Read all…
Posted on 14 July 2026 by ScegliAuto
Fiat Bravo (2007-2014 / Bravo2)
Replacing the Rear Brake Pads on a Fiat Bravo
In this video, you will learn how to remove and replace the rear brake pads on a Fiat Bravo. First, lift the car with a jack and remove the rear wheel by …Read all…
Posted on 16 April 2026 by ScegliAuto
Airbag (1) Alternator (1) Speaker (4) Shocks (3) Antenna (2) Car stereo (14) Battery (4) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (1) Timing belt (3) Air conditioner (1) A/C controls (3) Onboard computer (1) Checks and maintenance (7) Dashboard (5) Shifter boot (1) MAF sensor (1) Brake rotors (2) Side marker light (1) Headlight (5) Tail light (5) Fog lights (4) Air filter (8) Cabin air filter (11) Diesel fuel filter (7) Oil filter (4) Parking brake (2) Clutch (1) Grille (3) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (3) Interior dome light bulb (2) Instrument panel light (2) License plate light (1) (3) Handle (1) Engine (7) Engine oil (4) Clock (6) Door trim panel (7) Front bumper (3) Rear bumper (2) Brake pads (5) Shift knob (4) Instrument cluster (2) Radiator (2) Fuse box (23) Seat (1) Parking sensors (1) Suspension system (2) Side mirror (6) Warning light – error code (7) Service warning light (19) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (4) Turbocharger (1) Valve (1) EGR valve (3) Steering wheel (4)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos