Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake pads

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear brake pads on the Fiat Bravo. First, open the bonnet and unscrew the cap of the brake fluid reservoir, then lift the rear of the vehicle, taking all necessary safety precautions.

Next, remove the wheel, unscrew the two bolts of the caliper with a 13mm spanner, and remove it while supporting it to avoid damaging the brake line. At this point, remove the old pads, clean any dirt present, and insert the replacements after compressing the piston.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads of the Fiat Bravo
How to Replace the Front Brake Pads of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this tutorial, learn how to remove and replace the front brake pads of the Fiat Bravo in simple and quick steps. First, lift the vehicle and remov…
Replacing the Rear Brake Pads on a Fiat Bravo
Replacing the Rear Brake Pads on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video, you will learn how to remove and replace the rear brake pads on a Fiat Bravo. First, lift the car with a jack and remove the rear whee…
How to Change the Brake Pads on a Fiat Bravo 2 (198)?
How to Change the Brake Pads on a Fiat Bravo 2 (198)?
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, see how to change the rear brake pads on a Fiat Bravo 2. First, lift the car and remove the wheel. Once done, unscrew the two…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos