Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Removal of the front bumper on Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Front bumper
Operation: Removal of the front bumper on Fiat Bravo

When working with the engine off and the handbrake applied, raise the hood and secure it. Unscrew all the torx bolts that secure the bumper at the top, as shown in the video. Now get a Phillips screwdriver and unscrew the screws in the wheel arches. Also unscrew the torx bolts securing the lower bumper (then lean under the front of the vehicle) and that's it. Simple! As you can see, it is an operation that takes time but is definitely within everyone's reach. While pulling out the bumper, try to work slowly, although it takes strength.


Posted on 20 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos