Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

This guide will show you how to remove and replace the front headlamp bulb on the Fiat Bravo; this operation is done with the headlamp removed. First, remove the plastic cover behind the front headlamp by disconnecting the electrical connector and releasing the metal clip to remove the bulb.

Ensure the new bulb has the same fitting as the original. Now, install the new light (in this case, a LED type), connect it, and check its operation; finally, reassemble the headlamp unit!


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Fiat Bravo
How to Replace the Front Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Here are the instructions on how to remove and replace the dipped beam bulb of the front headlight on a Fiat Bravo. First, open the vehicle's bonnet …
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlamp bulbs fitted on a Fiat Bravo. Open the front bonnet by pulling the lever located at the bottom right of t…
How to Replace the Front Headlight Bulbs on Fiat Bravo
How to Replace the Front Headlight Bulbs on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlight bulbs on Fiat Bravo: open the front bonnet by pulling the lever located at the bottom right of the dashb…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos