Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : Reverse light replacement on Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Rear light bulb
Operation: Reverse light replacement on Fiat Bravo

Raise the car with a jack, as you will have to slip under it. As shown in the video, locate the reverse light bulb connector. Put your hand in and, a little blindly, unscrew the same. To detach the bulb from its socket, just unscrew the first. Fit the new bulb by pushing it into its holder and screwing it on. Now insert the support in its seat paying attention to the cleats of the same, which must fit perfectly. Screw it on. Again this process will be done a little blindly, so it may take some time. Check that the new bulb works.


Posted on 9 February 2024 by ScegliAuto



How to replace the side indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but resistant plastic tool and leveraging, let's start by disengaging the indicator light of our Fiat Bravo. Once this is done, we will
How to reset the "Service" warning light on a Fiat Bravo 1.4
Fiat Bravo (2007-2014 / Bravo 2) Before starting, we will have to sit on the driver's seat of our Fiat Bravo 1.4. Let's start, therefore, by going to activate the instrument panel, b
Replacement of the rear headlight bulb for the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) When the brake light bulb of the Fiat Bravo burns out, it is necessary, for our safety, to replace it as soon as possible: let's see how. We open the

How to set the time in the Citroen DS3?

In this tutorial we can see how to set the time in the Citroen DS3, an extremely simple and fast operation, to be carried out for example after being left with the battery on the ground or following the transition to winter and summer time. First of all, turn on the instrument panel, then press the "Menu" button on the center console and enter the settings section. Then select "Display configuration", then "Date and time configuration" and proceed with the time change using the same keys. Once finished, we select "OK" at the bottom left.

Watch the video!


by ScegliAuto

More videos