Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front strut on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Shocks

First, lift the bonnet and secure it, then clean the nut of the upper support of the strut related to the affected shock absorber. Move the rubber seal and loosen the nut with a 19 mm spanner. Raise the front of the car and remove the affected front wheel. Disconnect the connector and brake line from the bracket. Unscrew the nut to remove the bar from the shock absorber support, then unscrew the bolts that secure the strut to the hub. Remove the shock absorber support and disassemble the strut using the special tool shown in the video.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Position Bulb on the Fiat Bravo
How to Replace the Front Position Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Today, in this video tutorial, we will see how to remove and replace the front position bulb or daytime running light on the Fiat Bravo. First, open …
How to replace the shock absorbers on the Fiat Bravo
How to replace the shock absorbers on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Today we will explain the steps to follow to replace the shock absorbers of the Fiat Bravo model 2. The first step includes: - opening the front hood…
How to Remove the Handbrake Flange on a Fiat Bravo
How to Remove the Handbrake Flange on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you begin, sit in the driver's seat of your Fiat Bravo and fully disengage the handbrake. Using a flathead screwdriver as a lever, start to un…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos