Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Position Bulb on the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

Today, in this video tutorial, we will see how to remove and replace the front position bulb or daytime running light on the Fiat Bravo. First, open the bonnet and start by removing the rubber cover behind the front headlamp; then disconnect the electrical connector along with the bulb, pulling it out from the bulb holder, as shown in the video.

At this point, insert the new bulb of the correct type (in this case, a new LED bulb is fitted); now let's also replace the other front position light!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Fiat Bravo
How to Replace the Front Headlight Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Here are the instructions on how to remove and replace the dipped beam bulb of the front headlight on a Fiat Bravo. First, open the vehicle's bonnet …
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide will show you how to remove and replace the front headlamp bulb on the Fiat Bravo; this operation is done with the headlamp removed. First…
How to Remove the Fog Light Bulb on a Fiat Bravo
How to Remove the Fog Light Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Replace the fog light bulb on a Fiat Bravo. Here’s how to remove the damaged bulb. Remove the plastic cover at the bottom of the bumper (plastic cap)…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos