Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cylinder Head Fixing Pins

Model: Fiat Bravo - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Engine

See other generations:
Video tutorial

Before applying the new cylinder head gasket, re-thread the fixing holes on the block, choosing the correct pitch for the tap. During this operation, ensure that no debris ends up in the cylinders. Apply copper grease to the bottom of the thread on the new pins and just below the head.

Position the gasket and cylinder head on the block and insert the new set of pins, which should be tightened in a cross pattern using both a torque wrench and a calibrated spanner. This will ensure even tightening.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Remove Spark Plugs from Fiat Bravo
How to Remove Spark Plugs from Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to remove the spark plugs from a Fiat Bravo? Open the bonnet and see how to remove the ignition plugs of the car. Remove the plastic cover locate…
Exhaust Manifold Gasket Replacement
Exhaust Manifold Gasket Replacement
Fiat Bravo (1995-2001 / ) Before applying the new gasket to the exhaust manifold, thoroughly clean the gasket seat, removing any dirt and deposits that could compromise its ad…
Replacement of Intake Manifold Gasket
Replacement of Intake Manifold Gasket
Fiat Bravo (1995-2001 / ) Before proceeding with the installation of the new intake manifold gasket, it is essential to clean the surfaces of both the manifold and the cylinde…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos