Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Washer Pump on Fiat Bravo 2007

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Windshield wipers

Remove the bolts from the left front wheel, lift the car, and remove the wheel. Next, unscrew the screws of the wheel arch liner. Remove the wheel arch liner. Using a pair of long-nose pliers, detach and pull out the windscreen washer pump (you will need to open the three metal clips). Meanwhile, disconnect the various hoses and the connector, as shown in the video. It is advisable to take photos if you are unsure how everything was connected. Insert the new small pump and reconnect everything as it was originally with the pump being replaced. Refit the wheel arch liner and the wheel in reverse order.

Updated on 31 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Replacement of the timing belt for the Fiat Bravo 1.9 MultiJet.
Fiat Bravo (2007-2014 / Bravo 2) The main steps for today will allow us to disassemble and replace the timing belt of the Fiat Bravo 1.9 MultiJet. First, let's raise the vehicle and …
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…
How to Replace the Side Indicator on a Fiat Bravo
How to Replace the Side Indicator on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Using a thin but sturdy plastic tool, lever the side indicator out of your Fiat Bravo. Once done, disconnect the outer cover of the indicator from th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos