Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs on the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Tail light

Today, learn how to replace the position and stop bulb on the second series Fiat Bravo. Open the boot of the vehicle. Get a Phillips screwdriver or a 10mm hex screwdriver and a P21/5W bulb. Start by unscrewing the two screws of the headlamp. Pull the headlamp towards you, being careful to disengage the two pins. Once extracted, unscrew the old bulb and replace it with the new unit. Clean the area if necessary and proceed in reverse to reinstall the headlamp in its housing. Job done. As you can see, it was a simple and quick task.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on Fiat Bravo
How to Replace the Front Headlight Bulbs on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlight bulbs on Fiat Bravo: open the front bonnet by pulling the lever located at the bottom right of the dashb…
How to Dismantle the Rear Light of the Fiat Bravo 2
How to Dismantle the Rear Light of the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) Learn how to dismantle and replace the rear light and the bulbs inside the second series Fiat Bravo. First, open the boot lid and start by undoing th…
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlamp bulbs fitted on a Fiat Bravo. Open the front bonnet by pulling the lever located at the bottom right of t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos