Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Tail light

When the stop bulb of the Fiat Bravo burns out, it is important for your safety to replace it as soon as possible: here’s how. Open the boot, position yourself in front of the affected light, and unscrew the two screws on the inner side that secure it. Pull the light towards you; by slightly rotating it, you will access the rear where you can release two clips to free the plate housing the bulbs. Remove the burnt bulb by turning it slightly counterclockwise, replace it with a new one, ensuring correct placement. Reassemble everything by reversing the previous steps.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Fiat Bravo
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlamp bulbs fitted on a Fiat Bravo. Open the front bonnet by pulling the lever located at the bottom right of t…
Replacing the Front Headlamp Bulb on the Fiat Bravo
Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide outlines the main steps to remove the front headlamp bulb on the Fiat Bravo and replace it with an LED type. First, remove the headlamp fr…
How to Replace the Rear Light Bulb on a Fiat Bravo
How to Replace the Rear Light Bulb on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To replace the rear light bulb on a Fiat Bravo, lift the boot lid to access the screws located next to the light. By unscrewing these screws, you can…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos