Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DS
    3. :
  3. DS 4
    4. : How to reset the tire pressure warning light on Citroen Ds4

DS DS 4 - Video tutorial

Model: DS DS 4 MK 1 - Years 2011-2018
Part: -board computer
Operation: How to reset the tire pressure warning light on Citroen Ds4

Each time the maintenance service provided for the car is carried out, which includes the replacement of the oil and the relative filter, it will be necessary to reset the Service warning light on the display in the center of the dashboard, to do this it is necessary to identify on the lower part of the instrument panel on the right side the control marked with the symbol of the wrench. Then with the ignition off, press and hold this command and at the same time turn on the panel, wait a few seconds until the service signal is canceled.


Posted on 9 May 2024 by ScegliAuto



How to reset the service light on the Citroen DS4?
DS DS 4 (2011-2018 / MK 1) Performing a service warning light reset on the Citroen DS4 is a very simple operation that can be done independently. To perform the reset, we need
Reset the service warning light on Citroen DS4
DS DS 4 (2011-2018 / MK 1) At the end of a certain number of time or kilometers, all cars need to take a service (or Service) and the car will signal this with a warning light
How do you reset the service light on a Citroen DS4?
DS DS 4 (2011-2018 / MK 1) We changed the motor oil in our Citroen DS4 but the service light is still on in the instrument panel, well, in this very short tutorial we are shown

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos