Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Urea warning light on the Citroën Spacetourer?

Model: Citroen Spacetourer MK 1 - Years 2016-2024
Part: Warning light – error code

When the Urea warning light illuminates on the instrument panel of the Citroën Spacetourer, it indicates that the level of additive fluid in the designated tank is low, and you need to top it up. The cap for topping up is located on the left side of the vehicle, just below the driver's door and in front of the rear passenger door. By opening the cap, you can pour the additive fluid into the tank until it is full. Once the fluid has been added, close the tank and ensure that the warning light is off.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light on the Citroen Spacetourer van?
How to reset the AdBlue warning light on the Citroen Spacetourer van?
Citroen Spacetourer (2016-2024 / MK 1) If the AdBlue warning light has come on in the instrument panel of our Citroen Spacetourer van, it means that the pollution control system liquid has…
How to Reset the Service Light on the Citroën Spacetourer?
How to Reset the Service Light on the Citroën Spacetourer?
Citroen Spacetourer (2016-2024 / MK 1) To reset the Service light on the Citroën Spacetourer, press and hold the button with the spanner icon located in the centre of the dashboard. While …
How to Reset the Service Light on the Citroën Spacetourer?
How to Reset the Service Light on the Citroën Spacetourer?
Citroen Spacetourer (2016-2024 / MK 1) To reset the Service light on the Citroën Spacetourer, press and hold the SET 000 button located in the centre of the instrument panel while it is of…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos