Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the Citroen Spacetourer

Model: Citroen Spacetourer MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

Video tutorial

In this guide, you will find all the steps you need to follow if you want to remove the rear light of your Citroen Spacetourer yourself. First, park the vehicle on a flat surface for safety, then go outside and reach the rear of your Citroen Spacetourer.

At this point, fully lift the bonnet and, using a cross-head screwdriver, unscrew all the screws securing the light you want to remove. Finally, pull the light towards you and disconnect the electrical cable.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

How do you disassemble the rear light of the Citroen SpaceTourer?
How do you disassemble the rear light of the Citroen SpaceTourer?
Citroen Spacetourer (2016-2024 / MK 1) The vehicle mentioned above can be seen presented in the attached video review. That being said, let's now proceed to describe the process of replaci…
Where is the OBD port located on the Citroen Spacetourer?
Where is the OBD port located on the Citroen Spacetourer?
Citroen Spacetourer (2016-2024 / MK 1) In this new guide, we will help you find in a few seconds the OBD port located inside the cabin of your Citroen Spacetourer, which allows you to iden…
How to reset the Urea warning light on the Citroën Spacetourer?
How to reset the Urea warning light on the Citroën Spacetourer?
Citroen Spacetourer (2016-2024 / MK 1) When the Urea warning light illuminates on the instrument panel of the Citroën Spacetourer, it indicates that the level of additive fluid in the desi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos