Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Citoren Jumpy Service (but also Peugeot Expert and Fiat Scudo)

Model: Citroen Jumpy MK 1 - Years 1994-2007
Part: Warning light – error code

How to reset the service light on a 1994-2007 Citroen Jumpy (but also Peugeot Expert and Fiat Scudo, the procedure remains the same for these models too). Close the doors and apply the handbrake. We put the key in the dashboard to turn on the instrument panel and at the same time press and hold the button on the dashboard, located to the left of the odometer, near the water temperature needle. It must be held down for about ten seconds. Then release the button, turn off the ignition and remove the key. The reset is done and it was really very simple.

Posted on 8 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Citroen Jumpy / Fiat Scudo / Peugeot Expert service
How to reset the Citroen Jumpy / Fiat Scudo / Peugeot Expert service
Citroen Jumpy (1994-2007 / MK 1) To reset the service of a Citroen Jumpy / Fiat Scudo / Peugeot Expert we operate as follows: we turn on the instrument panel and notice that the wren…
The Citroen Jumpy is also replicated in other brands, with different names.
The Citroen Jumpy is also replicated in other brands, with different names.
Citroen Jumpy (2016-2026 / MK 3) In this video, we are explained something that we might have known "instinctively" but didn't know in detail: namely, that medium-weight vans are lar…
How to reset the maintenance light on Citroen Jumpy and Peugeot Expert
How to reset the maintenance light on Citroen Jumpy and Peugeot Expert
Citroen Jumpy (2016-2026 / MK 3) In this video we see how to turn off the service light on the Citroen Jumpy III or on the Peugeot Expert III; the procedure is the same for both vehi…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos