Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumpy
    4. : How to reset the Citroen Jumpy / Fiat Scudo / Peugeot Expert service

Citroen Jumpy - Video tutorial

Model: Citroen Jumpy MK 1 - Years 1994-2007
Part: -board computer
Operation: How to reset the Citroen Jumpy / Fiat Scudo / Peugeot Expert service

To reset the service of a Citroen Jumpy / Fiat Scudo / Peugeot Expert we operate as follows: we turn on the instrument panel and notice that the wrench warning light is on. We turn off the instrument panel, hold down the button on the left on the instrument panel and at the same time turn on the instrument panel, on the display we notice a countdown that starts from 10 and reaches 0: when it reaches 0, we can release the button on the left of the panel instruments and turn off the instrument panel. Now we can test if the reset was successful by switching the instrument panel back on, we see the new kilometers for service and the operation is finished.


Posted on 1 April 2024 by ScegliAuto



How to reset the Citoren Jumpy Service (but also Peugeot Expert and Fiat Scudo)
Citroen Jumpy (1994-2007 / MK 1) How to reset the service light on a 1994-2007 Citroen Jumpy (but also Peugeot Expert and Fiat Scudo, the procedure remains the same for these models
How to reset the Citroen Jumpy service light
Citroen Jumpy (2016-2024 / MK 3) If you do not know what are the necessary steps to be able to properly reset the service light on your Citroen Jumpy then this guide is all you need.
How to reset the service light on a Citroen Jumpy van?
Citroen Jumpy (2016-2024 / MK 3) In this tutorial we can see how to reset the service in a Citroen Jumpy van, an extremely simple and fast operation, to be performed only after compl

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos