Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Citroën C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Citroën C3, open the tailgate so you can move the carpet inside the boot corresponding to the light. Once moved, you can unscrew the pin that secures the light in its housing; it can now be pulled out by disconnecting its connector.

Once the light is removed, you can open it from the back to pull out the corresponding bulb and replace it with a new one. Once inserted, you can close the light and reposition it in its housing.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Citroën C3?
How to Replace the Rear Light Bulb on a Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To replace the rear light bulb on a Citroën C3, open the tailgate to access the side of the boot corresponding to the bulb to be replaced. Under the …
How to Replace the Rear Indicator Bulb of a Citroen C3
How to Replace the Rear Indicator Bulb of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you start, open the rear hatch of your Citroen C3. Begin by unscrewing and removing the screws securing the rear light. Next, pull the light f…
Replacing the Dipped Beam Bulb in a Citroen C3 SX
Replacing the Dipped Beam Bulb in a Citroen C3 SX
Citroen C3 (2016-2023 / SY, SX) In this video, see how to replace the dipped beam bulb in a Citroen C3 that has blown. Open the bonnet of the engine compartment, position yourself i…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos