Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Indicator Bulb of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tail light bulb

Before you start, open the rear hatch of your Citroen C3. Begin by unscrewing and removing the screws securing the rear light. Next, pull the light from its housing, and then disconnect the associated electrical connector. This will give you access to the bulb holder. Proceed by unclipping the clips securing the bulb holder to the rear light. At this point, you will have access to the blown rear indicator bulb, which you need to unclip and remove, completing the disassembly. To install the new rear indicator bulb, follow these steps in reverse, and you will have completed the replacement.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external side indicator bulb of the Citroen C3
How to replace the external side indicator bulb of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) If you own a first-generation Citroen C3 and have noticed that the bulb of the external side indicator has suddenly stopped working, don't worry beca…
How to Replace the Indicator Bulb in the Front Headlight of a Citroen C3
How to Replace the Indicator Bulb in the Front Headlight of a Citroen C3
Citroen C3 (2009-2016 / SC) To replace the indicator bulb located in the front headlight assembly of the Citroen C3, first open the front bonnet of the engine compartment to acc…
How to Replace the Indicator Bulbs on the Citroen C3
How to Replace the Indicator Bulbs on the Citroen C3
Citroen C3 (2009-2016 / SC) This guide shows you how to remove and replace the front and rear indicator bulbs on the Citroen C3. First, open the bonnet and start by removing the…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos