Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the oil filter on Citroen C3 1.4 HDI (MK1)

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Oil filter
Operation: How to replace the oil filter on Citroen C3 1.4 HDI (MK1)

Let's see in this short video how to remove and replace the oil filter cartridge on a Citroen C3 first series, with 1.4 HDI engine. Before proceeding with the replacement of the filter, it is necessary to drain the engine oil by removing the vent bolt found under the engine; then we open the bonnet and locate the oil filter, which we find at the bottom between the intake sleeve and the battery, as shown in the video. Now we use a 27mm socket wrench to unscrew and remove it, replacing the oil cartridge inside!


Posted on 17 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2016-2023 - Where is the Citroà «n C3 oil filter located? Read Answer
    • C3 2002-2009 - Where is the oil filter of the Citroen C3 diesel 1.4 hdi? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 diesel oil filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos