Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Citroen C3 HDI

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Engine oil

Today, learn how to replace the engine oil and oil filter while performing the routine maintenance service on the Citroen C3 HDI. First, lift the vehicle and start by loosening the oil drain bolt located under the engine using a 21 mm socket spanner; allow the oil to drain into a container for about ten minutes. Next, unscrew the oil filter and replace it with a new one, hand-tightening the cartridge before gently tightening it; remove the oil filler cap to pour in the new oil, checking the level with the dipstick.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Citroen C3 1.4 HDi
How to Change the Engine Oil and Oil Filter on a Citroen C3 1.4 HDi
Citroen C3 (2009-2016 / SC) Today, follow these instructions to remove and replace the engine oil and fuel filter on a Citroen C3 1.4 HDi. First, raise the vehicle and remove th…
How to Replace the Oil Filter on a Citroen C3 1.4 HDI (MK1)
How to Replace the Oil Filter on a Citroen C3 1.4 HDI (MK1)
Citroen C3 (2002-2009 / FC, FN) Watch this short video to learn how to remove and replace the oil filter cartridge on a first-generation Citroen C3 with a 1.4 HDI engine. Before pro…
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
Citroen C3 (2002-2009 / FC, FN) This guide outlines the steps to remove and replace the timing belt on a Citroen C3 1.6 HDI. Remember, the timing belt should be replaced every 112,0…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2009-2016 - How many liters of engine oil does it take in the Citroen C3 1.2 petrol engine? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos