Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Diesel filter replacement on Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Diesel filter
Operation: Diesel filter replacement on Citroen C3

Replacing the diesel filter of the Citroen C3? Let's see the disassembly of the piece. Lift the bonnet and put it in safety, once the fuel filter has been identified, disconnect it from the hoses and connecting cables. Unscrew the tightening screws above the filter with a socket wrench. We take out the worn filter. We mount the filter container in the engine compartment with all its parts (pipes and power cables). We mount the new filter inside the container. We turn on the vehicle and see the starting of the Citroen C3. We close the front hood at the end of assembly.


Posted on 14 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • C3 2002-2009 - Where is the fuel filter on Citroen C3? Read Answer
    • C3 2009-2016 - Where is the Citroen C3 1.4 1.6 HDI diesel filter located? Read Answer
    • C3 2002-2009 - Where is the diesel filter of a Citroen C3 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos