Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the fuel filter on C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Petrol filter
Operation: How to replace the fuel filter on C3

Replace the fuel filter on a Citroen C3? Let's remove the filter from under the vehicle, let's see. We lift the car onto a column bridge, locate the petrol filter. Disconnect the cables and the various circulation pipes from the filter, unscrew the tightening screws on the sides of the filter. Once the filter has been removed, remove it from the car (replace it with a new filter). We mount the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the locking screws. We enter the vehicle and turn on the instrument panel with the key, we test the ignition of the vehicle.


Posted on 21 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2002-2009 - Where is the petrol filter on the Citroën C3 located? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 petrol filter located? Read Answer
    • C3 2002-2009 - Where is the petrol filter located in the Citroen C3? Read Answer
    • C3 2009-2016 - In what position is the petrol filter of the Citroen C3? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 petrol filter located? Read Answer
    • C3 2002-2009 - Where is the LPG filter of a Citroen C3 with Landi Renzo system located? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 petrol filter located? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 petrol filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos