Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a 2019 Citroen C3 1.2 Petrol

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Cabin air filter

In this video tutorial, you can see how to replace the cabin filter in a 2019 Citroen C3 1.2 petrol by following a few simple steps. After purchasing a new cabin filter from an authorised parts dealer, get into the vehicle, turn off the engine, and pull the handbrake. You can find the cabin filter by lifting the bonnet, under the windscreen. Remove the plastic grille with all the holes visible under the windscreen. Once this grille is removed, you can see the cabin filter. Extract the filter and replace it with a new one, ensuring to insert the filter in the direction indicated by the arrows on the filter itself (insert the new filter in the same direction as the old one to avoid mistakes).

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Citroën C3?
How to Replace the Cabin Filter on a Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the cabin filter on a Citroën C3, open the bonnet to access the engine bay, specifically the grille located just below the windscreen. Her…
Replace the Cabin Air Filter on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let's replace the worn pollen filter on a Citroen C3 and see how to do it. The cabin filter is located in the engine compartment under the windscreen…
How to replace the cabin filter on a 2018 Citroën C3?
How to replace the cabin filter on a 2018 Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To replace the cabin filter on a 2018 Citroën C3, open the bonnet to access the upper part of the engine bay. You will find a grille that needs to be…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos