Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Citroen C3 Pluriel

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

In today's video, you will see how to turn off the service light (identified by a spanner) on the Citroen C3 Pluriel. This tutorial also applies to other models from the same years of the French manufacturer, including the C2 and C3. Remember to perform this operation only after carrying out the maintenance recommended by the manufacturer and outlined in the manual.

Locate the button on the instrument panel; press and hold it while turning the ignition key. A countdown of 10 seconds will begin. At the end of this period, you will see that the service reset has been completed.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Citroen C3 (2003-2010 / Pluriel) In this guide, you will find the main instructions on how to remove and install the roof of the Citroen C3 Pluriel Spyder. First, open the rear hatch…
Citroen C3 (2003-2010 / Pluriel) Today, we will explain how to independently reset the service light related to the car service on a Citroen C3. Turn on the instrument cluster of the…
Citroen C3 (2002-2009 / FC, FN) If any devices in your Citroen C3 Pluriel have suddenly stopped working, first check the status of the relevant fuses, whose diagrams are shown in th…

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos