Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting a Three-Bike Carrier on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Body

This video demonstrates a very easy-to-install three-bike carrier. You can find it on the miksgarage.com website, and it is the Peruzzo Venezia model priced at £79.99. Shipping is free for orders over £99.00, so if you find any other accessories, it may be worth it. As shown in the video, the fittings are very simple with straps that easily attach to the rear tailgate, and the contact points with the bodywork are all well covered with soft rubber strips to prevent damage. The bicycles are also securely fastened and easy to lock.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan from a Citroen C4 Grand Picasso
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle …
How to disassemble the rear door of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the rear door of the Citroen C4 Picasso. First of all, we open the f…
How to disassemble and replace the original radio of the Citroen C4 Picasso
How to disassemble and replace the original radio of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) The instructions provided in this guide will show us how to disassemble and replace the original car radio of the Citroen C4 Picasso. First, we get i…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos