Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Citroen DS3?

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Tire pressure warning light

Have you had a flat with your Citroen DS3 and, after replacing the tyre, the tyre pressure light remains on? Here's how to reset it. Use the buttons on the radio and press the "setup" button to begin, then select the "Define vehicle parameters" option that appears on the display using the central volume button. Use it again to select "Driving assistance" and scroll down in the new submenu to find the "under-inflation" option. Now, simply confirm by selecting "yes" from the two options presented.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Citroen DS3
How to Reset the Tyre Pressure Warning Light on the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) This short and simple guide will show you how to reset the tyre pressure warning light (TPMS) on the Citroen DS3; before performing the reset, ensure…
How to Reset the Tyre Pressure Light in the Citroen DS3?
How to Reset the Tyre Pressure Light in the Citroen DS3?
Citroen Ds3 (2010-2019 / MK 1) In this tutorial, you will see how to reset the tyre pressure light in the Citroen DS3, a very simple and quick operation that should only be done af…
How to Reset the Tyre Pressure Warning Light on a Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) This guide explains how to reset the tyre pressure warning light on a Citroen DS3 by following these simple steps. First, get in the car and turn the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos