Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on the Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

After changing the engine oil in your vehicle, it is also necessary to reset the service light. This guide shows you the entire procedure required to perform this operation on a first-generation Citroen C3, produced from 2002 to 2009. The task is quite simple; first, press and hold the button to the right of the speedometer, then turn the key to the first position to switch on just the instrument panel.

You will see a countdown appear on the display, so continue to hold the button until the time expires to complete the reset.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Citroen C3 (2002-2009 / FC, FN) Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independentl…
Citroen C3 (2016-2023 / SY, SX) To reset the Service light on the Citroën C3, press and hold the button located at the bottom of the instrument panel on the left. While holding it d…
Citroen C3 (2009-2016 / SC) Manually resetting the service light on your 2010 Citroen C3 is very straightforward; just follow the steps in the following guide to complete the op…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos