Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2009 Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Service warning light

Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independently. This maintenance light reset procedure is the same for other Citroen models. To reset the light, you need to: - press the button located on the right side of the instrument panel while simultaneously turning on the instrument panel; - hold down the button until the countdown ends; - turn off and restart the instrument panel; If the service light does not reset, repeat the reset procedure.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen C3
How to Reset the Service Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today, you will learn the steps to reset the service light on the Citroen C3. To reset, press the button with the spanner symbol on the instrument pa…
How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2009-2016 / SC) Resetting the service light on Citroen vehicles is a very simple and quick operation to perform independently; today we will take the Citroen C3 mode…
How to Reset the Service Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) When the service light illuminates on the dashboard of your Citroen C3, it means that a service is required. To perform the service, you need to repl…

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos