Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen C3

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Service warning light

Today, you will learn the steps to reset the service light on the Citroen C3. To reset, press the button with the spanner symbol on the instrument panel display. At the same time, turn on the ignition and hold the button until the countdown ends. Then, simply switch off and back on the vehicle to complete the service light reset related to the service interval. If the light comes back on, repeat the procedure before going to the garage for a diagnostic check.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
How to Reset the Service Light on a 2009 Citroen C3
How to Reset the Service Light on a 2009 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independentl…
How to Reset the Service Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) When the service light illuminates on the dashboard of your Citroen C3, it means that a service is required. To perform the service, you need to repl…

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos