Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to reset the service light on the Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: -board computer
Operation: How to reset the service light on the Citroen C3

To reset the service light of the Citroen C3, we need to follow some simple steps that are divided into 4 phases: - close all doors; - press the button located on the right side of the instrument panel while simultaneously turning on the instrument panel; - keep the button pressed until the end of the countdown; once finished, all we have to do is turn off and turn on the instrument panel again. If the service light has not been reset, perform the reset again. If the problem persists, go to the workshop to perform a diagnostic check using computerized diagnostics.


Posted on 4 April 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2009-2016 - Why doesn't the Citroen C3's START&STOP work? Read Answer
    • C3 2016-2023 - Why does the AdBlue warning light on the Citroen C3 stay on even after refueling? Read Answer
    • C3 2016-2023 - Why did the Citroen C3 service light come on? Read Answer
    • C3 2002-2009 - Why is the on-board computer of the Citroà «n C3 not working? Read Answer
    • C3 2009-2016 - What does the yellow tire warning light on the Citroen C3 mean? Read Answer
    • C3 2009-2016 - How to reset the service warning light in a Citroen C3? Read Answer
    • C3 2009-2016 - Why does the on-board computer in C3 not turn on? Read Answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read Answer
    • C3 2016-2023 - Why does the on-board computer of a Citroen C3 not work? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos